Mono Power Pack Amplifier with PowerStack Capability KTA-200M
Alpine KTA-200M Power Pack
compact mono subwoofer amplifier
200 watts RMS x 1 at 4 ohms or 2 ohms
CTA-2006 compliant
Dynamic Peak Power (DPP) technology adds a burst of power when needed
selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave)
preamp inputs only
PowerStack bracket included for mounting amp behind an Alpine iLX-W670 or iLX-407 digital multimedia receiver
Remote Bass-Knob ready with the RUX-KNOB.2 (sold separately)
wiring, hardware, and fuse not included with amplifier
12-gauge power and ground leads and a 20A fuse recommended
dimensions: 7-3/4"W (with wiring) x 1-3/8"H x 3-9/16"D
Alpine KTA-200M Power Pack
compact mono subwoofer amplifier
200 watts RMS x 1 at 4 ohms or 2 ohms
CTA-2006 compliant
Dynamic Peak Power (DPP) technology adds a burst of power when needed
selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave)
preamp inputs only
PowerStack bracket included for mounting amp behind an Alpine iLX-W670 or iLX-407 digital multimedia receiver
Remote Bass-Knob ready with the RUX-KNOB.2 (sold separately)
wiring, hardware, and fuse not included with amplifier
12-gauge power and ground leads and a 20A fuse recommended
dimensions: 7-3/4"W (with wiring) x 1-3/8"H x 3-9/16"D
Alpine KTA-200M Power Pack
compact mono subwoofer amplifier
200 watts RMS x 1 at 4 ohms or 2 ohms
CTA-2006 compliant
Dynamic Peak Power (DPP) technology adds a burst of power when needed
selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave)
preamp inputs only
PowerStack bracket included for mounting amp behind an Alpine iLX-W670 or iLX-407 digital multimedia receiver
Remote Bass-Knob ready with the RUX-KNOB.2 (sold separately)
wiring, hardware, and fuse not included with amplifier
12-gauge power and ground leads and a 20A fuse recommended
dimensions: 7-3/4"W (with wiring) x 1-3/8"H x 3-9/16"D
-
Performance
RMS Power Output: 200W x 1 @ 2Ω
Minimum Impedance (Unbridged): 2Ω
Frequency Response: 0 Hz
THD @ Rated Power: 1%
Signal-to-Noise Ratio: 80 dB
Input Voltage: 14.4V
Features
Amplifier Class: D
Built-in DSP: No
Remote Control: Optional
Low-Pass Crossover: Off / 60 / 80 / 120 Hz
Low-Pass Slope: 24 dB/Oct
Bass Boost: No
Fan Cooled: No
Fuse Rating: 20A
Speaker Level Inputs: No
Preamp Outputs: No
Dimensions
Width: 7-3/4"
Height: 1-3/8"
Depth: 3-9/16"
-
Mono amplifier
12" Input/Output/Power harness
1 Head unit (iLX-W650) mounting bracket
2 Universal mounting brackets
Four M5x6mm Allen head machine screws (3mm)
Two M2.6x8mm Machine screws
Four 3/8" Screws
Four 8" Zip Ties
Warranty information
On-line product registration information
FCC Compliance Statement
