Photoroom_20260401_124530.png
Photoroom_20260401_124833.png
Photoroom_20260401_124457.png
Photoroom_20260401_124545.png
Photoroom_20260401_124522.png
Photoroom_20260401_124515.png
Photoroom_20260401_124530.png
Photoroom_20260401_124833.png
Photoroom_20260401_124457.png
Photoroom_20260401_124545.png
Photoroom_20260401_124522.png
Photoroom_20260401_124515.png

EPIC Series mono subwoofer amplifier — 1000 watts RMS x 1 at 1 ohm AudioControl EPIC1000

$389.95

Compact, power-packed, and affordable

AudioControl's EPIC1000 amplifier offers you more power per square inch and watts per dollar than most other car amplifiers on the market today. This mono subwoofer amp uses Class D technology to punch above its weight, sending out up to 1000 watts and make your sub sing out loud and clear with minimal stress to your car's electrical system. All this power is packed into a rugged, compact amp that'll fit in a lot of different spaces in a lot of different vehicles.

Bass system power, control, and tuning

Lovers of loud bass can strap two EPIC1000s together to create a 2000-watt subwoofer system. The amplifier was designed specifically for subwoofers as it features low-pass and subsonic crossover filters to eliminate unwanted high- and ultra-low-frequencies from the mix, a tunable bass boost for extra oomph, and a wired remote control so you can fiddle with the bass volume from your front seat. The amp has preamp inputs only, so you'll need a line output converter or a similar device like an EPICENTER to connect to a factory system if you're not using an aftermarket radio with RCA outputs.

Made for THE EPICENTER®

For ultimate bass sound and connectivity, the EPIC1000 includes a power and ground connection harness that'll work with AudioControl's EPICENTER bass enhancers, as well as with their other line output converters that take factory speaker-level signals and make them suitable for the amp's input.

Compact, power-packed, and affordable

AudioControl's EPIC1000 amplifier offers you more power per square inch and watts per dollar than most other car amplifiers on the market today. This mono subwoofer amp uses Class D technology to punch above its weight, sending out up to 1000 watts and make your sub sing out loud and clear with minimal stress to your car's electrical system. All this power is packed into a rugged, compact amp that'll fit in a lot of different spaces in a lot of different vehicles.

Bass system power, control, and tuning

Lovers of loud bass can strap two EPIC1000s together to create a 2000-watt subwoofer system. The amplifier was designed specifically for subwoofers as it features low-pass and subsonic crossover filters to eliminate unwanted high- and ultra-low-frequencies from the mix, a tunable bass boost for extra oomph, and a wired remote control so you can fiddle with the bass volume from your front seat. The amp has preamp inputs only, so you'll need a line output converter or a similar device like an EPICENTER to connect to a factory system if you're not using an aftermarket radio with RCA outputs.

Made for THE EPICENTER®

For ultimate bass sound and connectivity, the EPIC1000 includes a power and ground connection harness that'll work with AudioControl's EPICENTER bass enhancers, as well as with their other line output converters that take factory speaker-level signals and make them suitable for the amp's input.

  • Product info:

    • mono subwoofer amplifier

      • 400 watts RMS x 1 at 4 ohms

      • 700 watts RMS x 1 at 2 ohms

      • 1000 watts RMS x 1 at 1 ohm

    • bridgeable with a second EPIC1000 to produce 2000 watts RMS x 1 at 2 ohms

    • Class D amp technology

      • frequency response: 10-190 Hz

    • variable low-pass filter (40-180 Hz, 12 dB/octave)

    • variable subsonic filter (Off-50 Hz, 12 dB/octave)

    • EPICBoost™ Variable Frequency Bass Boost (0-12 dB at 30-80 Hz)

    More info:

    • ACR-E wired remote control included

    • power harness for accessory preamp included

      • compatible with AudioControl line output converters and Epicenter bass enhancers

      • pre-installed 1A fuse included for accessory power connection

    • preamp inputs only

    • wiring, fuse, and hardware not included with amplifier:

      • 4-gauge power and ground leads and a 100A fuse recommended

    • dimensions: 9.42"W x 2.01"H x 6.09"D

    • Performance

      • RMS Power Output: 400 W x 1

      • Peak Power Output: N/A

      • Power at 2 Ohms: 700 W x 1

      • Power at 1 Ohm: 1000 W x 1

      • Bridged Power: N/A

      • Minimum Impedance (Bridged): N/A

      • Minimum Impedance (Unbridged): 1 Ohm

      • Frequency Response: 10–190 Hz

      • Total Harmonic Distortion (THD): 1% at rated RMS power

      • Signal-to-Noise Ratio: 91 dB

      • Input Voltage: 14.4 V

      Features

      • Amplifier Class: D

      • Built-in DSP: No

      • Remote Control: Yes

      • Low-Pass Crossover: 40–180 Hz

      • Low-Pass Slope: 12 dB/octave

      • High-Pass Crossover: N/A

      • High-Pass Slope: N/A

      • Bass Boost: 0–12 dB

      • Bass Boost Frequency: 30–80 Hz

      • Fan Cooled: No

      • Fuse Rating: 100 A

      • Speaker-Level Inputs: No

      • Preamp Outputs: No

      Dimensions

      • Width: 9-7/16 in

      • Height: 2-1/16 in

      • Depth: 6-1/8 in

    • AudioControl EPIC1000 owner's manual

    • Mono subwoofer amplifier (installed 1A mini fuse for Link output)

    • ACR-E Remote level control

    • 16' Remote level control cable (RJ-12 connectors on both ends)

    • 39" Epicenter link cable (4-pin connector on one end/ 3-pin Epicenter power & ground connector on other end)

    • Four 5/8" screws

    • Four 3/8" screws

    • 2 Allen keys (3mm & 2.5mm)

    • Spare 1A mini fuse

    • Quickstart guide