Photoroom_20260401_125536.png
Photoroom_20260401_125506.png
Photoroom_20260401_125529.png
Photoroom_20260401_125523.png
Photoroom_20260401_125547.png
Photoroom_20260401_125536.png
Photoroom_20260401_125506.png
Photoroom_20260401_125529.png
Photoroom_20260401_125523.png
Photoroom_20260401_125547.png

EPIC Series mono subwoofer amplifier — 1500 watts RMS x 1 at 1 ohm EPIC1500

$489.99

Compact, power-packed, and affordable

AudioControl's EPIC1500 amplifier offers you more power per square inch and watts per dollar than most other car amplifiers on the market today. This mono subwoofer amp uses Class D technology to punch above its weight, sending out up to 1500 watts and make your sub sing out loud and clear with minimal stress to your car's electrical system. All this power is packed into a rugged, compact amp that'll fit in a lot of different spaces in a lot of different vehicles.

Bass system power, control, and tuning

Lovers of loud bass can strap two EPIC1500s together to create a 3000-watt subwoofer system. The amplifier was designed specifically for subwoofers as it features low-pass and subsonic crossover filters to eliminate unwanted high- and ultra-low-frequencies from the mix, a tunable bass boost for extra oomph, and a wired remote control so you can fiddle with the bass volume from your front seat. The amp has preamp inputs only, so you'll need a line output converter or a similar device like an EPICENTER to connect to a factory system if you're not using an aftermarket radio with RCA outputs.

Made for THE EPICENTER®

For ultimate bass sound and connectivity, the EPIC1500 includes a power and ground connection harness that'll work with AudioControl's EPICENTER bass enhancers, as well as with their other line output converters that take factory speaker-level signals and make them suitable for the amp's input.

Compact, power-packed, and affordable

AudioControl's EPIC1500 amplifier offers you more power per square inch and watts per dollar than most other car amplifiers on the market today. This mono subwoofer amp uses Class D technology to punch above its weight, sending out up to 1500 watts and make your sub sing out loud and clear with minimal stress to your car's electrical system. All this power is packed into a rugged, compact amp that'll fit in a lot of different spaces in a lot of different vehicles.

Bass system power, control, and tuning

Lovers of loud bass can strap two EPIC1500s together to create a 3000-watt subwoofer system. The amplifier was designed specifically for subwoofers as it features low-pass and subsonic crossover filters to eliminate unwanted high- and ultra-low-frequencies from the mix, a tunable bass boost for extra oomph, and a wired remote control so you can fiddle with the bass volume from your front seat. The amp has preamp inputs only, so you'll need a line output converter or a similar device like an EPICENTER to connect to a factory system if you're not using an aftermarket radio with RCA outputs.

Made for THE EPICENTER®

For ultimate bass sound and connectivity, the EPIC1500 includes a power and ground connection harness that'll work with AudioControl's EPICENTER bass enhancers, as well as with their other line output converters that take factory speaker-level signals and make them suitable for the amp's input.

  • Product info:

    • mono subwoofer amplifier

      • 600 watts RMS x 1 at 4 ohms

      • 1000 watts RMS x 1 at 2 ohms

      • 1500 watts RMS x 1 at 1 ohm

    • bridgeable with a second EPIC1500 to produce 3000 watts RMS x 1 at 2 ohms

    • Class D amp technology

      • frequency response: 10-190 Hz

    • variable low-pass filter (40-180 Hz, 12 dB/octave)

    • variable subsonic filter (Off-50 Hz, 12 dB/octave)

    • EPICBoost™ Variable Frequency Bass Boost (0-12 dB at 30-80 Hz)

    More info:

    • ACR-E wired remote control included

    • power harness for accessory preamp included

    • preamp inputs only

    • wiring, fuse, and hardware not included with amplifier:

      • 4-gauge power and ground leads and an 150A fuse recommended

    • dimensions: 10.62"W x 2.01"H x 6.09"D

    • Performance

      • Channels: 1 (Mono)

      • RMS Power Output:

        • 600W RMS @ 4Ω

        • 1000W RMS @ 2Ω

        • 1500W RMS @ 1Ω

      • Minimum Impedance (Unbridged): 1 Ohm

      • Frequency Response: 10Hz – 190Hz

      • THD at Rated RMS Power: 1%

      • Signal-to-Noise Ratio: 92 dB

      • Input Voltage: 14.4V

      Crossover & Tuning

      • Low-Pass Crossover: 40Hz – 180Hz

      • Low-Pass Slope: 12 dB/octave

      • Bass Boost: 0 – 12 dB

      • Bass Boost Frequency: 30Hz – 80Hz

      • High-Pass Filter: N/A

      Features

      • Amplifier Class: Class D

      • Built-In DSP: No

      • Remote Bass Control: Yes

      • Fan Cooled: No

      • Speaker-Level Inputs: No

      • Preamp Outputs: No

      Electrical

      • Fuse Rating: 150A

      Dimensions

      • Width: 10-5/8”

      • Height: 2-1/16”

      • Depth: 6-1/8”

    • AudioControl EPIC1500 owner's manual

    • Mono subwoofer amplifier (installed 1A mini fuse for Link output)

    • ACR-E Remote level control

    • 16' Remote level control cable (RJ-12 connectors on both ends)

    • 39" Epicenter link cable (4-pin connector on one end/ 3-pin Epicenter power & ground connector on other end)

    • Four 5/8" screws

    • Four 3/8" screws

    • 2 Allen keys (3mm & 2.5mm)

    • Spare 1A mini fuse

    • Quickstart guide