Photoroom_20260401_125854.png
Photoroom_20260401_130515.png
Photoroom_20260401_125837.png
Photoroom_20260401_125830.png
Photoroom_20260401_125901.png
Photoroom_20260401_125846.png
Photoroom_20260401_125854.png
Photoroom_20260401_130515.png
Photoroom_20260401_125837.png
Photoroom_20260401_125830.png
Photoroom_20260401_125901.png
Photoroom_20260401_125846.png

EPIC Series mono subwoofer amplifier — 750 watts RMS x 1 at 1 ohm EPIC750

$329.99

Compact, power-packed, and affordable

AudioControl's EPIC750 amplifier offers you more power per square inch and watts per dollar than most other car amplifiers on the market today. This mono subwoofer amp uses Class D technology to punch above its weight, sending out up to 750 watts and make your sub sing out loud and clear with minimal stress to your car's electrical system. All this power is packed into a rugged, compact amp that'll fit in a lot of different spaces in a lot of different vehicles.

Bass system power, control, and tuning

Lovers of loud bass can strap two EPIC750s together to create a 1500-watt subwoofer system. The amplifier was designed specifically for subwoofers as it features low-pass and subsonic crossover filters to eliminate unwanted high- and ultra-low-frequencies from the mix, a tunable bass boost for extra oomph, and a wired remote control so you can fiddle with the bass volume from your front seat. The amp has preamp inputs only, so you'll need a line output converter or a similar device like an EPICENTER to connect to a factory system if you're not using an aftermarket radio with RCA outputs.

Made for THE EPICENTER®

For ultimate bass sound and connectivity, the EPIC750 includes a power and ground connection harness that'll work with AudioControl's EPICENTER bass enhancers, as well as with their other line output converters that take factory speaker-level signals and make them suitable for the amp's input.

Compact, power-packed, and affordable

AudioControl's EPIC750 amplifier offers you more power per square inch and watts per dollar than most other car amplifiers on the market today. This mono subwoofer amp uses Class D technology to punch above its weight, sending out up to 750 watts and make your sub sing out loud and clear with minimal stress to your car's electrical system. All this power is packed into a rugged, compact amp that'll fit in a lot of different spaces in a lot of different vehicles.

Bass system power, control, and tuning

Lovers of loud bass can strap two EPIC750s together to create a 1500-watt subwoofer system. The amplifier was designed specifically for subwoofers as it features low-pass and subsonic crossover filters to eliminate unwanted high- and ultra-low-frequencies from the mix, a tunable bass boost for extra oomph, and a wired remote control so you can fiddle with the bass volume from your front seat. The amp has preamp inputs only, so you'll need a line output converter or a similar device like an EPICENTER to connect to a factory system if you're not using an aftermarket radio with RCA outputs.

Made for THE EPICENTER®

For ultimate bass sound and connectivity, the EPIC750 includes a power and ground connection harness that'll work with AudioControl's EPICENTER bass enhancers, as well as with their other line output converters that take factory speaker-level signals and make them suitable for the amp's input.

  • Product info:

    • mono subwoofer amplifier

      • 300 watts RMS x 1 at 4 ohms

      • 500 watts RMS x 1 at 2 ohms

      • 750 watts RMS x 1 at 1 ohm

    • bridgeable with a second EPIC750 to produce 1500 watts RMS x 1 at 2 ohms

    • Class D amp technology

      • frequency response: 10-190 Hz

    • variable low-pass filter (40-180 Hz, 12 dB/octave)

    • variable subsonic filter (Off-50 Hz, 12 dB/octave)

    • EPICBoost™ Variable Frequency Bass Boost (0-12 dB at 30-80 Hz)

    More info:

    • ACR-E wired remote control included

    • power harness for accessory preamp included

      • compatible with AudioControl line output converters and Epicenter bass enhancers

      • pre-installed 1A fuse included for accessory power connection

    • preamp inputs only

    • wiring, fuse, and hardware not included with amplifier:

      • 4-gauge power and ground leads and an 80A fuse recommended

    • dimensions: 8.62"W x 2.01"H x 6.1"D

    • Channels: 1 (Mono)

    • Amplifier Class: Class D

    • Built-In DSP: No

    • RMS Power Output:

      • 300W RMS @ 4Ω

      • 500W RMS @ 2Ω

      • 750W RMS @ 1Ω

    • Minimum Impedance (Unbridged): 1 Ohm

    • Frequency Response: 10Hz – 190Hz

    • THD at Rated RMS Power: 1%

    • Signal-to-Noise Ratio: 92 dB

    • Input Voltage: 14.4V

    Crossover & Tuning

    • Low-Pass Crossover: 40Hz – 180Hz

    • Low-Pass Slope: 12 dB/octave

    • Bass Boost: 0 – 12 dB

    • Bass Boost Frequency: 30Hz – 80Hz

    • High-Pass Filter: N/A

    Features

    • Remote Bass Control: Yes

    • Fan Cooled: No

    • Speaker-Level Inputs: No

    • Preamp Outputs: No

    Electrical

    • Fuse Rating: 80A

    Dimensions

    • Width: 8-5/8”

    • Height: 2-1/16”

    • Depth: 6-1/8”

    • AudioControl EPIC750 owner's manual

    • Mono subwoofer amplifier (installed 1A mini fuse for Link output)

    • ACR-E Remote level control

    • 16' Remote level control cable (RJ-12 connectors on both ends)

    • 39" Epicenter link cable (4-pin connector on one end/ 3-pin Epicenter power & ground connector on other end)

    • Four 5/8" screws

    • Four 3/8" screws

    • 2 Allen keys (3mm & 2.5mm)

    • Spare 1A mini fuse

    • Quickstart guide