Prime Series Mono - 500 watts RMS x 1 at 2 ohms R2-500X1

$459.99

Primed for Performance, the R2-500X1 is a 500 watt, class-D amplifier capable of operating at 4Ω or 2Ω mono. This amplifier is extremely efficient because of its Class-D technology which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass. Perfect for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music.

[ user’s manual ]

Primed for Performance, the R2-500X1 is a 500 watt, class-D amplifier capable of operating at 4Ω or 2Ω mono. This amplifier is extremely efficient because of its Class-D technology which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass. Perfect for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music.

[ user’s manual ]

    • mono subwoofer amplifier

      • 300 watts RMS x 1 at 4 ohms

      • 500 watts RMS x 1 at 2 ohms

    • CTA-2006 compliant

    • Class-D amplifier design

    • variable low-pass filter (50-250 Hz, 12 dB/octave)

    • variable bass boost (0-18 dB at 45 Hz)

    • variable subsonic filter (15-40 Hz, 12 dB/octave)

    More Info:

    • C.L.E.A.N. gain setup system includes clip lights

    • wired remote Punch Level Control included

    • auto remote turn-on

    • preamp and speaker-level inputs

    • preamp outputs

    • wiring, fuse, and hardware not included with amplifier

      • 4-gauge power and ground leads and an 80-amp fuse recommended

    • dimensions: 8-1/2"W x 2"H x 7-3/4"D

  • Performance

    • RMS Power Output (Watts x Channels): 300 x 1

    • Peak Power Output (Watts x Channels): N/A

    • Power at 2 Ohms (Watts x Channels): 500 x 1

    • Power at 1 Ohm (Watts x Channels): ---

    • Bridged Power (Watts x Channels): N/A

    • Minimum Impedance Bridged: N/A

    • Minimum Impedance Unbridged: 2

    • Best Frequency Response: 20-250 Hz

    • THD at Rated RMS Power: 1%

    • Signal to Noise Ratio: 75 dB

    • Input Voltage: 14.4v

    Features

    • Amplifier Class: D

    • Built-in DSP: No

    • Remote Control: Yes

    • Low-Pass Crossover Frequency: 50-250 Hz

    • Low-Pass Slope (dB/octave): 12 dB/octave

    • High-Pass Crossover Frequency: N/A

    • High-Pass Slope (dB/octave): N/A

    • Bass Boost: 0-18 dB

    • Bass Boost Frequency: 45 Hz

    • Fan Cooled: No

    • Fuse Rating: 80

    • Speaker Level Inputs: Yes

    • Preamp Outputs: 2

    Dimensions

    • Width (inches): 8-1/2

    • Height (inches): 2

    • Depth (inches): 7-3/4