Photoroom_20260212_120625.png
Photoroom_20260212_120506.png
Photoroom_20260212_120536.png
Photoroom_20260212_120601.png
Photoroom_20260212_120612.png
Photoroom_20260211_114205.png
Photoroom_20260212_120625.png
Photoroom_20260212_120506.png
Photoroom_20260212_120536.png
Photoroom_20260212_120601.png
Photoroom_20260212_120612.png
Photoroom_20260211_114205.png

Prime Series mono subwoofer amplifier — 1,200 watts RMS x 1 at 1 ohm R2-1200X1

$679.99

Give your sub the power it deserves

Rockford Fosgate's Prime Series R2-1200X1 amplifier can power your subwoofer with up to 1,200 watts RMS. You can adjust the low-pass filter, infrasonic filter, and Rockford Fosgate's famous Punch boost to get the best possible bass from the sub and enclosure in your vehicle.

Setting it up for optimum performance

Rockford Fosgate's C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) setup system ensures your bass will sound as clean and powerful as possible. It's a simple system to use — turn it up until the light shows red, then turn it down until the red light goes out. Speaker-level inputs let you hook this amp up to almost any system, even a factory stereo.

Give your sub the power it deserves

Rockford Fosgate's Prime Series R2-1200X1 amplifier can power your subwoofer with up to 1,200 watts RMS. You can adjust the low-pass filter, infrasonic filter, and Rockford Fosgate's famous Punch boost to get the best possible bass from the sub and enclosure in your vehicle.

Setting it up for optimum performance

Rockford Fosgate's C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) setup system ensures your bass will sound as clean and powerful as possible. It's a simple system to use — turn it up until the light shows red, then turn it down until the red light goes out. Speaker-level inputs let you hook this amp up to almost any system, even a factory stereo.

  • Product info:

    • mono subwoofer amplifier

      • 400 watts RMS x 1 at 4 ohms

      • 800 watts RMS x 1 at 2 ohms

      • 1,200 watts RMS x 1 at 1 ohm

    • CTA-2006 compliant

    • Class-D amplifier design

    • variable low-pass filter (50-250 Hz, 12 dB/octave)

    • variable subsonic filter (15-40 Hz, 12 dB/octave)

    • variable Punch bass boost (0-18 dB at 45 Hz)

    More Info:

    • C.L.E.A.N. gain setup system includes clip lights

    • wired remote Punch Level Control included

    • auto remote turn-on

    • preamp and speaker-level inputs

    • preamp outputs

    • wiring, fuse, and hardware not included with amplifier

      • 4-gauge power and ground leads and a 200-amp fuse recommended

  • Performance

    • Channels: 1 (Mono)

    • RMS Power Output:

      • 400W RMS @ 4Ω

      • 800W RMS @ 2Ω

      • 1200W RMS @ 1Ω

    • Minimum Impedance (Unbridged): 1 Ohm

    • Frequency Response: 20Hz – 250Hz

    • THD at Rated RMS Power: 1%

    • Signal-to-Noise Ratio: 75 dB

    • Input Voltage: 14.5V

    Crossover & Tuning

    • Low-Pass Crossover: 50Hz – 250Hz

    • Low-Pass Slope: 12 dB/octave

    • High-Pass Filter: N/A

    • Bass Boost: 0 – 18 dB

    • Bass Boost Frequency: 45Hz

    Features

    • Amplifier Class: Class D

    • Built-In DSP: No

    • Remote Bass Control: Yes

    • Fan Cooled: No

    • Speaker-Level Inputs: Yes

    • Preamp Outputs: 2

    Electrical

    • Fuse Rating: 200A

    Dimensions

    • Width: 11-1/4”

    • Height: 2”

    • Depth: 7-3/4”

    • Rockford Fosgate R2-1200X1 owner's manual

    • Mono subwoofer amplifier

    • Wired Remote Level Control module

    • 16' Remote cable (RJ-25 connector on both ends)

    • One 7" Speaker input harnesses

    • 3mm Allen Hex key

    • Four 3/4" Screws

    • Two 1/2" Screws

    • 5 Flat washers

    • 1 Nut

    • Installation and Operation instructions (English/ French/ Spanish/ German/ Italian)

    • Certificate of Performance

    • Rockford Fosgate contact information