Photoroom_20260211_114231.png
Photoroom_20260211_114143.png
Photoroom_20260211_114221.png
Photoroom_20260211_114405.png
Photoroom_20260211_114205.png
Photoroom_20260211_114242.png
Photoroom_20260211_114231.png
Photoroom_20260211_114143.png
Photoroom_20260211_114221.png
Photoroom_20260211_114405.png
Photoroom_20260211_114205.png
Photoroom_20260211_114242.png

Prime Series mono subwoofer amplifier — 250 watts RMS x 1 at 2 ohms R2-250X1

$379.99

Give your sub the power it deserves

Rockford Fosgate's Prime Series R2-250X1 amplifier can power your subwoofer with up to 250 watts RMS. You can adjust the low-pass filter, infrasonic filter, and Rockford Fosgate's famous Punch boost to get the best possible bass from the sub and enclosure in your vehicle.

Setting it up for optimum performance

Rockford Fosgate's C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) setup system ensures your bass will sound as clean and powerful as possible. It's a simple system to use — turn it up until the light shows red, then turn it down until the red light goes out. Speaker-level inputs let you hook this amp up to almost any system, even a factory stereo.

[ user manual ]

Give your sub the power it deserves

Rockford Fosgate's Prime Series R2-250X1 amplifier can power your subwoofer with up to 250 watts RMS. You can adjust the low-pass filter, infrasonic filter, and Rockford Fosgate's famous Punch boost to get the best possible bass from the sub and enclosure in your vehicle.

Setting it up for optimum performance

Rockford Fosgate's C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) setup system ensures your bass will sound as clean and powerful as possible. It's a simple system to use — turn it up until the light shows red, then turn it down until the red light goes out. Speaker-level inputs let you hook this amp up to almost any system, even a factory stereo.

[ user manual ]

  • Product info:

    • mono subwoofer amplifier

      • 150 watts RMS x 1 at 4 ohms

      • 250 watts RMS x 1 at 2 ohms

    • CTA-2006 compliant

    • Class D amplifier design

    • variable low-pass filter (50-250 Hz, 12 dB/octave)

    • variable bass boost (0-18 dB at 45 Hz)

    • variable subsonic filter (15-40 Hz, 12 dB/octave)

    More Info:

    • C.L.E.A.N. gain setup system includes clip lights

    • wired remote Punch Level Control included

    • auto remote turn-on

    • preamp and speaker-level inputs

    • preamp outputs

    • wiring, fuse. and hardware not included with amplifier

      • 8-gauge power and ground leads and a 50-amp fuse recommended

    • dimensions: 8-1/8"W x 2"H x 7-3/4"D

  • Key Performance

    • RMS Power Output: 150W x 1​

    • Peak Power Output: N/A​

    • Power @ 2 Ohms: 250W x 1​

    • Power @ 1 Ohm: N/A​

    • Bridged Power: N/A​

    • Minimum Impedance (Bridged): N/A​

    • Minimum Impedance (Unbridged): 2 Ohms​

    • Frequency Response: 20 – 250 Hz​

    • THD @ Rated RMS Power: 1%​

    • Signal-to-Noise Ratio: 80 dB​

    • Input Voltage: 14.4V​

    Crossover & Bass Control

    • Low-Pass Crossover: 50 – 250 Hz​

    • Low-Pass Slope: 12 dB/octave​

    • High-Pass Crossover: N/A​

    • High-Pass Slope: N/A​

    • Bass Boost: 0 – 18 dB​

    • Bass Boost Frequency: 45 Hz​

    Features

    • Amplifier Class: D​

    • Built-in DSP: No​

    • Remote Control: Yes​

    • Fan Cooled: No​

    • Speaker-Level Inputs: Yes​

    • Preamp Outputs: 2​

    Electrical

    • Fuse Rating: 50A​

    Dimensions

    • Width: 8-1/8"​

    • Height: 2"​

    • Depth: 7-3/4

    • Rockford Fosgate R2-250X1 owner's manual

    • Mono subwoofer amplifier

    • Wired Remote Level Control module

    • 16' Remote cable (RJ-25 connector on both ends)

    • One 7" Speaker input harnesses

    • 3mm Allen Hex key

    • Four 3/4" Screws

    • Two 1/2" Screws

    • 5 Flat washers

    • 1 Nut

    • Installation and Operation instructions (English/ French/ Spanish/ German/ Italian)

    • Certificate of Performance

    • Rockford Fosgate contact information