Mille Pro Series 10" shallow-mount component subwoofer MPS 250 S4 4Ω
Mille PRO shallow subwoofers have been designed to achieve exceptional performance even when there is very little space available to install the subwoofer box.
MPS 250 S4 is optimized to work in ultra-compact sealed boxesstarting from only 14 Lt (0.49 Cf). A typical example is a subwoofer enclosure under the rear bench of pickup trucks, where the space - and the height - are limited.
Mille PRO subwoofer have a depth/performance ratio never achieved before thanks to the impressive cone excursion capacity which is 20% higher than a traditional design.
This exceptional target has been achieved thanks to the ingenious suspension group design featuring a dedicated support structure for spider and coil. This solution has allowed to move the magnetic group inwards, reducing the depth and at the same time maximizing cone linear excursion.
Mille PRO shallow subwoofers have been designed to achieve exceptional performance even when there is very little space available to install the subwoofer box.
MPS 250 S4 is optimized to work in ultra-compact sealed boxesstarting from only 14 Lt (0.49 Cf). A typical example is a subwoofer enclosure under the rear bench of pickup trucks, where the space - and the height - are limited.
Mille PRO subwoofer have a depth/performance ratio never achieved before thanks to the impressive cone excursion capacity which is 20% higher than a traditional design.
This exceptional target has been achieved thanks to the ingenious suspension group design featuring a dedicated support structure for spider and coil. This solution has allowed to move the magnetic group inwards, reducing the depth and at the same time maximizing cone linear excursion.
Mille PRO shallow subwoofers have been designed to achieve exceptional performance even when there is very little space available to install the subwoofer box.
MPS 250 S4 is optimized to work in ultra-compact sealed boxesstarting from only 14 Lt (0.49 Cf). A typical example is a subwoofer enclosure under the rear bench of pickup trucks, where the space - and the height - are limited.
Mille PRO subwoofer have a depth/performance ratio never achieved before thanks to the impressive cone excursion capacity which is 20% higher than a traditional design.
This exceptional target has been achieved thanks to the ingenious suspension group design featuring a dedicated support structure for spider and coil. This solution has allowed to move the magnetic group inwards, reducing the depth and at the same time maximizing cone linear excursion.
-
Size: 10-inch
Impedance (Ohms): 4
Cone Material: Polypropylene
Surround Material: Rubber
Basket Material: Die-Cast Aluminum
Grille: Black steel mesh
Free-Air: No
Dual Voice Coil: No
Sensitivity: 83.5 dB at 1 watt
Frequency Response: 25 - 400 Hz
Max RMS Power Handling: 500 watts
Peak Power Handling: 1000 watts
Top Mount Depth: 3 1/4 inches
Bottom Mount Depth: N/A
Cutout Diameter or Length: 9 3/16 inches
Frame Width: 10.812 inches
Frame Length: 10.812 inches
Vas: 21.2 liters
Fs: 29 Hz
Qts: 0.48
Xmax: 16.8 mm
-
One 10" Subwoofer
Grille (installed)
Grille removal tool
Eight 1-3/8" Allen head screws
4mm Allen Head bit
8 Speed clips
Owner's manual (English/ Spanish/ French/ German/ Italian/ Portuguese/ 28 Others)
Grille removal instructions
Template on the box lid
