-
down-firing sealed enclosure with two 10" Spike Series subwoofers
heavy-duty fiberglass construction with Roadkill Armor and EPM coating
poly-fiber fill
impedance: 2 ohms
power handling: 800 watts RMS (1200 watts peak)
frequency response: 20-250 Hz
sensitivity: 86 dB
dimensions: 51"W x 7.02"H x 13.55"D
powder-coated steel grilles included
-
The AudioControl TXGM14D10 Dual 10" Under Seat Sealed Subwoofer Enclosure can be installed in the following vehicles:
2014-2018 Chevrolet Silverado/GMC Sierra 1500 Crew Cab
2014-2019 Chevrolet Silverado/GMC Sierra 2500/3500 Crew Cab
-
The custom AudioControl TXGM14D10 sealed enclosure is constructed of heavy-duty fiberglass with internal bracing, providing excellent sound dampening properties and reduced resonance. The rugged enclosure features a heat-bonded EPM (Elastomeric Polyurethane Molecule) layer and Roadkill-Armor coating for added durability, UV protection, and weather-resistance. The TXGM14D10 enclosure is also resistant to chemicals, stains, scratches, and cracking.
-
The AudioControl TXGM14D10 is loaded with two Space Series 10" SPC-10S4 subwoofers. Both drivers feature a fiber matrix paper cone, with mica coating, and a durable isoprene polymer surround mounted to a powder-coated frame. The heavy-duty motor system features a 2.5" diameter voice coil with a 3-layer, high-temperature former for maximum efficiency. The two SPC-10S4 subwoofers are protected by removable metal-mesh grilles.
-
The two 4-ohm subwoofers are internally parallel-wired for a 2-ohm load at the single set of input terminals. The enclosure can handle 400-800W RMS (800W recommended); 1200W peak power.
-
The TXGM14D10 features two connection methods:
Spring Posts: A pair of spring posts can accept speaker wire up to 10-gauge in size.
Quick-Plug Harness: A removable 6" 2-pin harness (XT-90), with bare-ended 12-gauge wires, provides a quick-connection method that can easily be plugged and unplugged from the enclosure.
-
AudioControl TXGM14D10 owner's manual
Custom subwoofer enclosure loaded with two SPC-10S4 10" subwoofers
2 Mounting brackets
Four M6x75mm bolts (installed)
6" 2-Pin input harness
Installation instructions